ESI Ultrapure
Each conductivity sensor is pre-programmed and barcoded with a unique ID for easy traceability and data documentation when combined with the SciLog SciDoc software. Factory calibration data is also stored on each sensor’s chip for out-of-box, plug and play use.
The only pre-calibrated, single-use conductivity sensors with a gamma-stable memory device that stores data of all calibration, and sensor-specific information.
High Range: 0.1 – 200mS range (± 0.25 mS Accuracy)
Low Range: 0 – 100µS range (± 3 µS Accuracy)
Luer
3/8″ Barb
1/2″ Barb
3/4″ Tri-Clover
Design temperature: 150°C
Design pressure: 10 barg, 6 barg if pneumatic valve
Welding: According to EN-287-1
SciCon® sensors can increase the efficiency of downstream purification operations such as diafiltration and chromatography through accurate measurement of conductivity parameters. Measuring conductivitiy allows operators to monitor the progress of diafiltrations indicating when a target process stream conductivity has been met. Similarly, the conductivity of the solution also gives an indication of the progress of ion exchange or hydrophobic interaction chromatography steps. In addition conductivity measurement provides a quantified review of filters being equilibrated prior to performing filtration, ensuring the readiness of the filter media as well as minimizing the quantity of buffer required during the flushing and equilibration process.